- 已加入
- 11/9/03
- 訊息
- 1,712
- 互動分數
- 0
- 點數
- 36
我之前是使用ATI9550至尊版
在更換成為ATI9800pro後
開機會有兩種情況
1.過電約1秒鐘後CPU&Chipset風扇停止轉動
主機板上亮著一顆(紅色的LED)※
在壓一下Power鍵 主機板上之綠色LED亮起 之後再壓Power鍵無反應
此過程皆無螢幕訊號
※我查過此LED之涵義
AGP proof LED: Serving as a smart burnout
protection for the motherboard, this
red LED lights up if you plug in any 3.3V
AGP card into the AGP slot. When this
LED is Lit, there is no way you can turn
on the system power even if you press
the power button. The red LED(AGP
proof) is a smart protection from
motherboard burn out caused by an incorrect
AGP card. If you plug in any
3.3V AGP card into the 1.5V AGP slot,
this LED lights up thus preventing the
system to power up. This LED remains
off if you plug in a 1.5V AGP card.
2.啟動後CPU&Chipset風扇全速運轉
紅色之LED無亮起 就這樣一直持續著 也無螢幕訊號出現
我嘗試過Clear CMOS & 拔電池 皆無效 (我POWER現有拔喔)
換回原本那張9550也是一樣狀況
不知道有沒有什麼解決之道??
因為浩呆客服要星期一才有上班 so 先上來尋求高手解惑!!
在更換成為ATI9800pro後
開機會有兩種情況
1.過電約1秒鐘後CPU&Chipset風扇停止轉動
主機板上亮著一顆(紅色的LED)※
在壓一下Power鍵 主機板上之綠色LED亮起 之後再壓Power鍵無反應
此過程皆無螢幕訊號
※我查過此LED之涵義
AGP proof LED: Serving as a smart burnout
protection for the motherboard, this
red LED lights up if you plug in any 3.3V
AGP card into the AGP slot. When this
LED is Lit, there is no way you can turn
on the system power even if you press
the power button. The red LED(AGP
proof) is a smart protection from
motherboard burn out caused by an incorrect
AGP card. If you plug in any
3.3V AGP card into the 1.5V AGP slot,
this LED lights up thus preventing the
system to power up. This LED remains
off if you plug in a 1.5V AGP card.
2.啟動後CPU&Chipset風扇全速運轉
紅色之LED無亮起 就這樣一直持續著 也無螢幕訊號出現
我嘗試過Clear CMOS & 拔電池 皆無效 (我POWER現有拔喔)
換回原本那張9550也是一樣狀況
不知道有沒有什麼解決之道??
因為浩呆客服要星期一才有上班 so 先上來尋求高手解惑!!