[團字089號]DFI NF4-D改+靠得近散熱片

[elva7893]

問一下~貼靠的近是直接往保固貼紙貼上去嗎?
貼上靠的近~是否要用個風散吹記憶體呢@@?

 

[7.62mm (Ken)]

Originally posted by fantasy+May 5 2005, 05:23 PM--></div><table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td>QUOTE (fantasy @ May 5 2005, 05:23 PM)</td></tr><tr><td id='QUOTE'>

Originally posted by soothepain@May 5 2005, 04:48 PM
<!--QuoteBegin-小小楊

@May 5 2005, 12:27 PM
請問每一片修改過
出貨都測試OK的嗎

都經過測試,開機顯示SLI才出貨

應該還有sataⅡ吧 :huh:[/b][/quote]
f大越混越肥企囉,開題的測試連結,c老大有po... :co:

小滴沒有u,也沒有顯卡,不過不急,先給東哥捧個人場唄... ;ya;

ID :7.62mm (Ken)

NF4-D數量:1
NF4-D累記:10
散熱片(組)數量:5
散熱片(組)累記:37

 

[jeffchen]

Originally posted by 7.62mm (Ken)+May 5 2005, 05:50 PM--></div><table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td>QUOTE (7.62mm (Ken) @ May 5 2005, 05:50 PM)</td></tr><tr><td id='QUOTE'>

Originally posted by fantasy@May 5 2005, 05:23 PM

Originally posted by soothepain@May 5 2005, 04:48 PM
<!--QuoteBegin-小小楊

@May 5 2005, 12:27 PM
請問每一片修改過
出貨都測試OK的嗎

都經過測試,開機顯示SLI才出貨

應該還有sataⅡ吧 :huh:

f大越混越肥企囉,開題的測試連結,c老大有po... :co:

小滴沒有u,也沒有顯卡,不過不急,先給東哥捧個人場唄... ;ya;

ID :7.62mm (Ken)

NF4-D數量:1
NF4-D累記:10
散熱片(組)數量:5
散熱片(組)累記:37 [/b][/quote]
沒u喔 那等偶把威尼斯測完馬上賣泥 厚某 :sun:

 

[7.62mm (Ken)]

Originally posted by jeffchen+May 5 2005, 05:55 PM--></div><table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td>QUOTE (jeffchen @ May 5 2005, 05:55 PM)</td></tr><tr><td id='QUOTE'>

Originally posted by 7.62mm (Ken)@May 5 2005, 05:50 PM

Originally posted by fantasy@May 5 2005, 05:23 PM

Originally posted by soothepain@May 5 2005, 04:48 PM
<!--QuoteBegin-小小楊

@May 5 2005, 12:27 PM
請問每一片修改過
出貨都測試OK的嗎

都經過測試,開機顯示SLI才出貨

應該還有sataⅡ吧 :huh:

f大越混越肥企囉,開題的測試連結,c老大有po... :co:

小滴沒有u,也沒有顯卡,不過不急,先給東哥捧個人場唄... ;ya;

ID :7.62mm (Ken)

NF4-D數量:1
NF4-D累記:10
散熱片(組)數量:5
散熱片(組)累記:37

沒u喔 那等偶把威尼斯測完馬上賣泥 厚某 :sun:[/b][/quote]
迷有問題,好惑就收... ;nq;

靠腰!偶好像見獵心喜過頭,小弟沒有註文"靠得助"散熱片,來不及改囉!麻煩東哥明查... ;oq;

 

[柳堂司]

Originally posted by fantasy+May 5 2005, 05:23 PM--></div><table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td>QUOTE (fantasy @ May 5 2005, 05:23 PM)</td></tr><tr><td id='QUOTE'>

Originally posted by soothepain@May 5 2005, 04:48 PM
<!--QuoteBegin-小小楊

@May 5 2005, 12:27 PM
請問每一片修改過
出貨都測試OK的嗎

都經過測試,開機顯示SLI才出貨

應該還有sataⅡ吧 :huh: [/b][/quote]
我有問題
sata2用小白鯨會被power檔到，有沒有啥方法阿？

 

[fantasy]

Originally posted by 7.62mm (Ken)+May 5 2005, 05:50 PM--></div><table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td>QUOTE (7.62mm (Ken) @ May 5 2005, 05:50 PM)</td></tr><tr><td id='QUOTE'>

Originally posted by fantasy@May 5 2005, 05:23 PM

Originally posted by soothepain@May 5 2005, 04:48 PM
<!--QuoteBegin-小小楊

@May 5 2005, 12:27 PM
請問每一片修改過
出貨都測試OK的嗎

都經過測試,開機顯示SLI才出貨

應該還有sataⅡ吧 :huh:

f大越混越肥企囉,開題的測試連結,c老大有po... :co:

[/b][/quote]
您誤會我的意思了，
改好的nf4-d，除了SLI之外，應該還包括SATAⅡ，

如果只測有顯示SLI，那如果SATAⅡ沒有怎麼辦? :??:

 

[7.62mm (Ken)]

Originally posted by fantasy+May 5 2005, 06:49 PM--></div><table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td>QUOTE (fantasy @ May 5 2005, 06:49 PM)</td></tr><tr><td id='QUOTE'>

Originally posted by 7.62mm (Ken)@May 5 2005, 05:50 PM

Originally posted by fantasy@May 5 2005, 05:23 PM

Originally posted by soothepain@May 5 2005, 04:48 PM
<!--QuoteBegin-小小楊

@May 5 2005, 12:27 PM
請問每一片修改過
出貨都測試OK的嗎

都經過測試,開機顯示SLI才出貨

應該還有sataⅡ吧 :huh:

f大越混越肥企囉,開題的測試連結,c老大有po... :co:

您誤會我的意思了，
改好的nf4-d，除了SLI之外，應該還包括SATAⅡ，

如果只測有顯示SLI，那如果SATAⅡ沒有怎麼辦? :??:[/b][/quote]
喔!拍勢... ;oq;

如果沒sata II應該素沒改完全吧!小滴也不瞭,可能要東哥說一下囉... :OO:

 

[CHANHH]

ID: chanhh
NF4-D數量:1
NF4-D累記:11

 

[maikyoking]

ID:maikyoking
NF4-D數量:0
NF4-D累記:11
散熱片(組)數量:2
散熱片(組)累記:39

 

[always1024]

ID:always1024
NF4-D數量:0
NF4-D累記:11
散熱片(組)數量:5
散熱片(組)累記:44