[圖多]Mobile Barton 2600+配NF7S2.0極限詳測

  • 主題發起人 主題發起人 狂少
  • 開始日期 開始日期
"用心測就是好測試! 沒啥丟不丟臉的!" :D: 真訴至理名言
等小弟我有空拍好照在post上來,到時請大大們賞光並且批評一下哪裡需要改進的 :)

對了~狂大, 您這顆Mobile Barton 2600+ 是在Newegg買的嗎?
怎麼會是綠色版本的? 我看到的好像是褐色的耶.
難道有分新舊版本嗎?

先謝謝您的回答
 
Originally posted by 司@Apr 8 2004, 12:26 AM
"用心測就是好測試! 沒啥丟不丟臉的!" :D: 真訴至理名言
等小弟我有空拍好照在post上來,到時請大大們賞光並且批評一下哪裡需要改進的 :)

對了~狂大, 您這顆Mobile Barton 2600+ 是在Newegg買的嗎?
怎麼會是綠色版本的? 我看到的好像是褐色的耶.
難道有分新舊版本嗎?

先謝謝您的回答
按一下展開……
應該只是PCB配色差異,是在Newegg買的沒錯!
我今天收到時參照ocforum的database時,再看到蠻不漂亮的serial...
臉都綠了..
結果還是師父C大的觀晶大法正確... :lol:

您在US嗎?
 
just realize you are using Mach2, thought you were using LCO2 for your cooling. Do you happened to know how much your total electricity consumption on your current setup?
 
Originally posted by Colt357TW@Apr 8 2004, 12:35 AM
just realize you are using Mach2, thought you were using LCO2 for your cooling. Do you happened to know how much your total electricity consumption on your current setup?
按一下展開……
I think Mach II is not that power-consuming monster, isn't it?
Well, I've never heard about what the LCO2 is.
Some sentences from your post are not really coherent; for instance, like "Do you happened to know"...
If you can perfectly type "Big-5 code" you might wanna just go ahead and type it.
Don't have to challenge my English writing ability!
I appreciate your understanding!
 
Originally posted by 狂少+Apr 8 2004, 11:11 AM--></div><table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td>QUOTE (狂少 @ Apr 8 2004, 11:11 AM)</td></tr><tr><td id='QUOTE'> <!--QuoteBegin-overclocker@Apr 7 2004, 09:27 PM
狂兄~~我要看 cpu mark la.....
按一下展開……
來!我的壞習慣!都忘記CPUMARK :lkl:

29gcpumk.jpg


**米國買CPU沒得挑,一切都是天意(某人說的)

**這顆就算空冷(我試過)也能1.625v跑2450mhz左右


**BL721兄:是連跑都不能跑!
我懷疑是NF7S的原因!BIOS沒辦法認!都變成5x100 default [/b][/quote]
天意不會是我說的吧 |||
反正我沒啥天意可言
2500+去找你的時候,跟你差一天買的,結果爆爛~還外加降價咧
1700+也是差沒多久~一樣不怎麼樣 :MMM:
不買mobile 2600+了
現在1700+用用就好 :D:
 
哇~~~長江後浪,推前浪...前浪死在沙灘上.....之前那顆將軍可以安息了.....

阿彌陀佛~~ :lol:
 
每次看狂大的測試都熱血沸騰~~~~ :SSS:

只怪口袋裡的小朋友實在是太少嚕 :OPP: :MMM:
 
狂大, 我突然記得我在OC Forums還是 Xtreme那曾經看到他們在討論有關mobile Barton的FSB 問題. (mobile版的FSB=266, 普通desktop版的FSB=333, 記得好像是這樣, 不對的話請糾正我)
有些人建議是說最好做所謂的L12 Mod, 這樣才可以讓本來規格只有FSB=266的mobile barton,再超頻時會上的了比較高的FSB. 這只是小弟在網路上看到的, 實際的理論為何, 那時沒有深入的去細讀, 也閉O道聽塗說, 但是給你做個參考, 希望有所幫助.

Cathar好像也跟你有一樣的困擾,上不去高的FSB. 煩請你去這看看說不定可以找出原因 :D
http://forums.overclockers.com.au/showthre...15&pagenumber=1
 
Originally posted by 狂少+Apr 8 2004, 01:43 PM--></div><table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td>QUOTE (狂少 @ Apr 8 2004, 01:43 PM)</td></tr><tr><td id='QUOTE'> <!--QuoteBegin-Colt357TW@Apr 8 2004, 12:35 AM
just realize you are using Mach2, thought you were using LCO2 for your cooling. Do you happened to know how much your total electricity consumption on your current setup?
按一下展開……
I think Mach II is not that power-consuming monster, isn't it?
Well, I've never heard about what the LCO2 is.
Some sentences from your post are not really coherent; for instance, like "Do you happened to know"...
If you can perfectly type "Big-5 code" you might wanna just go ahead and type it.
Don't have to challenge my English writing ability!
I appreciate your understanding! [/b][/quote]
抱歉啦 我中文是用注音一個個打 回台練了3年還是打的很慢
對"笑ㄟ"一詞 我一直把它當成是 不被常規, 環境, 與傳統觀念所桎梏的人 我自己在MSN的nick上就用了 如果這句對您有所冒犯 還請海涵
 
Originally posted by 司@Apr 8 2004, 01:57 AM
狂大, 我突然記得我在OC Forums還是 Xtreme那曾經看到他們在討論有關mobile Barton的FSB 問題. (mobile版的FSB=266, 普通desktop版的FSB=333, 記得好像是這樣, 不對的話請糾正我)
有些人建議是說最好做所謂的L12 Mod, 這樣才可以讓本來規格只有FSB=266的mobile barton,再超頻時會上的了比較高的FSB. 這只是小弟在網路上看到的, 實際的理論為何, 那時沒有深入的去細讀, 也閉O道聽塗說, 但是給你做個參考, 希望有所幫助.

Cathar好像也跟你有一樣的困擾,上不去高的FSB. 煩請你去這看看說不定可以找出原因 :D
http://forums.overclockers.com.au/showthre...15&pagenumber=1
按一下展開……
那連結要註冊才看的到!
昨天已和水大討論過!的確如此!
感謝您!
 
你必須登入或註冊才能在此回覆。
上方 下方