[OPB]一探DFI x38LP LT之堂奧

  • 主題發起人 主題發起人 狂少
  • 開始日期 開始日期
可惜DFI產品在台灣,你有錢也買不太到!!
 
鑽石蝴蝶牌 的主機板 !

可惜DFI產品在台灣,你有錢也買不太到!!

鑽石蝴蝶牌 的主機板 !

Diamond + Flower + Inno....... = DFI

Design for innovatio

絕非一個"讚"字可以形容!
 
好美的板子!
等我忍痛把空冷4.4G的QX9650割愛!
我也要入手一張DFI LP LT X38!
 
http://www.ocxtreme.org/opb/dfix38/bench/testbed.jpg

TestBed

DFI X38 LP LT bios 1207
intel Qx9650 L739a6640
Asus 8800gts g92
Team Group DDR800@ 1200 4-4-4

spi 1m:
完全無OS優化 for spi
先猜一下,這種參數, vdimm要多少?
http://www.ocxtreme.org/opb/dfix38/...

請問 如果裝 T-120 會不會和 北橋 那個散熱片 撞在一起

:PPP: 看照片 蝴蝶 和 北橋的距離好像很接近
 
請問 如果裝 T-120 會不會和 北橋 那個散熱片 撞在一起

:PPP: 看照片 蝴蝶 和 北橋的距離好像很接近

和V1裝的方向一樣...
 
Dear OPB, I have a question - can the top portion of NB heatsink be detached? For some reasons I have to install HR-03 GT with the back position to make all PCI-E and PCI slots available, the only concern I have to this board is the top portion of NB heatsink hit HR-03 GT. From the pictures I guess I can take off the top portion of NB heatsink (means no heatpipe and top fins), is this true?
 
you can, but what 's that deal that you take off that heatpipe and reduce the heat dissipation?