GSKILL PC4400 TCCD at CAS2.0 電壓3v

[Jack_Tung]

Thanks kakaroto
因為他不懂中文所以我代他貼啦
有和原Post圖作者聯絡過
我猜想會部會在低cas 可以支援高電壓
原稿

I read the topic about high voltages on TCCD memory, so i tested with CAS2.0. And it worked!!

It seems that the TCCD memory dont like high voltages with high timings, i get lots of errors with CAS2.5 @3V and zero with CAS2.0 @3V.
So lowering the CAS latency gave me the oppertunity to play with more Vddr.

Great discovery i guess..

Here some screens with info 2-3-3-7 3.0v

3400+ AX
DFI Lanparty
2x 512MB GSKILL PC4400 " TCCD 431"

 

[Blank]

單通道跑260要用到3V :o

 

[小賴]

CL2的關係吧

 

[windaz]

3V...= =|||
會不會有燒焦的味道阿...Orz

 

[MJordan]

BH5應該有這實力吧 :P
看過有些大大的BH5超強的 :SSS:

 

[oushiza]

tccd加壓也有用阿？？？
不是效果不彰 :co:

 

[kick]

Originally posted by oushiza@Nov 15 2004, 10:48 PM
tccd加壓也有用阿？？？
不是效果不彰 :co:

誰說沒有用
小弟之前就是這樣玩
同樣超過300外頻
參數硬是可以跑5-3-3-2.5

 

[marc]

Originally posted by kick+Nov 15 2004, 10:56 PM--></div><table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td>QUOTE (kick @ Nov 15 2004, 10:56 PM)</td></tr><tr><td id='QUOTE'> <!--QuoteBegin-oushiza@Nov 15 2004, 10:48 PM
tccd加壓也有用阿？？？
不是效果不彰 :co:

誰說沒有用
小弟之前就是這樣玩
同樣超過300外頻
參數硬是可以跑5-3-3-2.5 [/b][/quote]
幾V啊 ;nq;
512MB的嗎 ;nq;

 

[kick]

Originally posted by marc+Nov 15 2004, 10:58 PM--></div><table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td>QUOTE (marc @ Nov 15 2004, 10:58 PM)</td></tr><tr><td id='QUOTE'>

Originally posted by kick@Nov 15 2004, 10:56 PM
<!--QuoteBegin-oushiza

@Nov 15 2004, 10:48 PM
tccd加壓也有用阿？？？
不是效果不彰 :co:

誰說沒有用
小弟之前就是這樣玩
同樣超過300外頻
參數硬是可以跑5-3-3-2.5

幾V啊 ;nq;
512MB的嗎 ;nq; [/b][/quote]
都有
磐英8kda3+配G-SLILL512mb(0425)或威剛512mb(0425)都跑3.3V到3.5V(使用mod)
友通NF3-250GB配宇瞻256mb(0425)都跑3.2V

 

[VIP]

原來是可以加高壓的