CPU散熱器扣具改裝

[fletcher033]

請教各位前輩
MSI CORE FROZR XL CPU散熱器
可以使用他牌的扣具安裝在1700腳位的主機板上嗎?

 

[soothepain]

請教各位前輩
MSI CORE FROZR XL CPU散熱器
可以使用他牌的扣具安裝在1700腳位的主機板上嗎?

有難度，各廠都長得不一樣

 

[fletcher033]

有難度，各廠都長得不一樣

了解! 謝謝您

 

[ygod]

自己改 1700的孔距是 夹在1155和2011中线上，
所以只要扣具同时支持1155和10211，就可以改，把上扣具过孔锉平，这样1700的孔位就正常装固定螺丝了
下定位买，买一个标准1700的背板就好，已经改了很多过去经典的散热器，想来也是intel的一大福利就是了

 

[kontasbowski]

Yes, you can use a different brand's mounting bracket, but you need to make sure it supports the socket and matches the mounting hole pattern exactly. For a 1700 socket (assuming AMD AM5 / Ryzen 7000‑series), double‑check the bracket specs and bolt‑hole spacing. If spacing and clip orientation match, most universal or third‑party brackets should work. If you want, I can list a few alternative mounting kits that people use successfully with the MSI Core Frozr XL cooler on 1700‑socket boards.

 

[Caden Frost]

I've tried cross-brand brackets a couple of times and the main thing I'd add is: check the standoff height carefully. Even if the hole spacing lines up after modification, different brands sometimes use slightly different standoff lengths, and that can mess with mounting pressure on the IHS. With the Core Frozr XL being a pretty heavy cooler, uneven pressure can tank temps fast.
If you end up modding the upper bracket like ygod mentioned, just make sure the cooler sits level after tightening. A simple straight-edge or even a credit card across the base usually shows right away if one side is pulling harder. It saves you a lot of re-mounting headaches.