ftp://ftp.abit.com.tw/pub/download/bios/k...-pro/kv8p16.exe
BIOS release 1.6 for KV8-Pro V1.0/1.1
Release information:
[ENGLISH]
1. Support Sempron CPU.
2. Update uGuru Utility to uKV8_018.BIN.
3. Modify "LDT Bus Frequency" item from FSBx5, x4, x3, x2 to x1, and
remove "Auto" selection.
4. Add FSB up to 400 MHz & enhance stability over 300 MHz.
5. Remove HyperTransport Voltage 1.4V.
6. Add "Fixed (74Mhz)" in AGP Ratio item.
7. Fix the issue that "LDT & PCI Bus Control" item "16bit" function fail.
8. BIOS compile date: 07/29/2004
[中文]
1. 支援 Sempron CPU.
2. 修改選項 "LDT Bus Frequency" 由 FSBx5, x4, x3, x2 至 x1, 並移除 "Auto"
選項.
3. 新增 FSB 至 400 MHz 及超過 300 MHz 之穩定性.
4. 移除 HyperTransport Voltage 1.4V.
5. 新增 "Fixed (74Mhz)" 於 AGP Ratio 選項.
6. 修正 "LDT & PCI Bus Control" 選項之 "16bit" 弁鄍╳?
7. BIOS日期: 07/29/2004
********************************* NOTE *********************************
1. How to upgrade BIOS:
a. Boot into MS-DOS or "Safe mode and command prompt" if you are using
Windows95/98
b. Run "kv8p16.exe" to extract all files.
c. Run "runme.bat"
*** Please notice that we suggest you flashing the bios with switches
"/py /sn /cd /cp /cc /cks /R" or by "runme.bat".
d. For more detail, please visit:
http://fae.abit.com.tw/cht/download/bioshelp.htm (Chinese)
http://fae.abit.com.tw/eng/download/bioshelp.htm (English)
2.After BIOS updated, pull off the power cord and then clear the CMOS data
via jumper before restarting system please.
============================================================================
