Q9550+DFI DK T2RS PLUS 跟4870X2 不合?

[basslines]

小弟我除了無言還是無言，方法用盡還是沒用...
請各位大大救我吧...

CPU:Q9550
MB: DFI LP DK T2RS PLUS
RAM:博帝 1066 1GX2
顯示卡:MSI ATI 1600
POWER 衡益 500W

以下是數據圖

IBT也過關4到5次...
以下是數據

倍頻 8.5
外頻 471
DRAM Speed 333/800
CPU VID Special Add +225
DRAM Voltage Control 2.455
SB CORE/CPU PLL Votage 1.55
NB CORE Votage 1.53XX
CPU VTT Votage 1.43
Vcore Droop Control DISABLE
Clockgen Voltage Control 3.75
CPU GTL 0/2 REF Volt 63
CPU GTL 1/3 REF Volt 63
North Bridge GTL REF Volt 61
FSB Vref 27

基於要一直超頻的情況下，不上卡王...所以用1600
可是當我確定數值之後，上ASUS 4870X2，就沒畫面了...難道不合嗎?
請各位大大救我吧....

 

[evil_rsx]

4870 x2 官方建議用 650w 以上


ATI Radeon™ HD 4870 X2 System Requirements

* PCI Express® based PC is required with one X16 lane graphics slot available on the motherboard
* 650 Watt or greater power supply with one 2x3-pin PCIe® power connector and one 2x4-pin PCIe® power connector is required (1K Watt with two 2x3-pin and two 2x4-pin connectors for ATI CrossFireX™ technology in dual mode)1
* Certified power supplies are recommended. Refer to http://ati.amd.com/certifiedPSU for a list of Certified products
* Certified system cases with good airflow and cooling are recommended. Refer to http://ati.amd.com/certifiedcases for a list of Certified products
* Minimum 1GB of system memory
* Installation software requires CD-ROM drive
* DVD playback requires DVD drive
* Blu-ray™ playback requires Blu-ray drive and full 1080p display requires a 1080p-capable monitor
* For a complete ATI CrossFireX™ system, a second ATI Radeon™ HD 4870 X2 graphics card, an ATI CrossFireX Ready motherboard and one ATI CrossFireX Bridge Interconnect cable per graphics card (included) are required

 

[basslines]

4870 x2 官方建議用 650w 以上


ATI Radeon™ HD 4870 X2 System Requirements

* PCI Express® based PC is required with one X16 lane graphics slot available on the motherboard
* 650 Watt or greater power supply with one 2x3-pin PCIe® power...

忘了說...我的顯示卡是獨立POWER 給他450W
絕對夠 放心...我已經獨立解決此問題..
感謝您...我會PO出來...

 

[keler]

想請問大大如何解此問題
是否能分享一下
謝謝大大