我的配備GSkill DDR3-1600 2Gx2 QX9650, P5E3 Premium, 以下是我的BIOS設定, 不知有無那裡出問題或需改善的地方, 不然我怎麼樣都無法同時跑2個以上的SUPER Pi, 跑一個倒沒問題??
Configure System Performance Settings
_________________________________________________________
Ai Overclock Tuner: Manual
CPU Ratio Control: 10
FSB Strap To North Bridge: Auto
FSB Frequency: 400
PCIE Frequency: 100
DRAM Frequency: DDR3-1601
DRAM Command Rate: Auto
DRAM CMD Skew on Channel A: Auto
DRAM CMD Skew on Channel B: Auto
DRAM CLK Skew on Channel A: Auto
DRAM CLK Skew on Channel B: Auto
DRAM Timing Control: Auto
1st Information: 9-9-9-24-5-88-12-6
2nd Information: 10-6-5-4-7-4-7
3rd Information: 24-8-1-10-10
DRAM Static Read Control: Auto
DRAM Dynamic Write Control: Auto
AI Clock Twister: Auto
AI Transaction Booster: Auto
C/P: A1 A2 | B1 B2
LVL: 08 08 | 08 08
******** Please key in numbers directly! ********
CPU Voltage: 1.42500
CPU GTL Voltage Reference(0/2): 0.630
CPU GTL Voltage Reference(1/3): 0.670
CPU PLL Voltage: Auto
FSB Termination Voltage: 1.44
DRAM Voltage: 1.90
NB Voltage: 1.63
NB GTL Voltage Reference: 0.67
SB Voltage: Auto
Clock Over-Charging Voltage: Auto
*************************************************
Load-Line Calibration: Performance(掉壓問題)
CPU Spread Spectrum: Disabled
PCIE Spread Spectrum: Disabled
Configure advanced CPU Settings
_________________________________________________________
CPU Ratio Setting: 10.0
C1E Support: Disabled
CPU TM Function: Disabled
Vanderpool Technology: Disabled
Execute Didable Bit: Disabled
Max CPUID Value Limit: Disabled
Configure System Performance Settings
_________________________________________________________
Ai Overclock Tuner: Manual
CPU Ratio Control: 10
FSB Strap To North Bridge: Auto
FSB Frequency: 400
PCIE Frequency: 100
DRAM Frequency: DDR3-1601
DRAM Command Rate: Auto
DRAM CMD Skew on Channel A: Auto
DRAM CMD Skew on Channel B: Auto
DRAM CLK Skew on Channel A: Auto
DRAM CLK Skew on Channel B: Auto
DRAM Timing Control: Auto
1st Information: 9-9-9-24-5-88-12-6
2nd Information: 10-6-5-4-7-4-7
3rd Information: 24-8-1-10-10
DRAM Static Read Control: Auto
DRAM Dynamic Write Control: Auto
AI Clock Twister: Auto
AI Transaction Booster: Auto
C/P: A1 A2 | B1 B2
LVL: 08 08 | 08 08
******** Please key in numbers directly! ********
CPU Voltage: 1.42500
CPU GTL Voltage Reference(0/2): 0.630
CPU GTL Voltage Reference(1/3): 0.670
CPU PLL Voltage: Auto
FSB Termination Voltage: 1.44
DRAM Voltage: 1.90
NB Voltage: 1.63
NB GTL Voltage Reference: 0.67
SB Voltage: Auto
Clock Over-Charging Voltage: Auto
*************************************************
Load-Line Calibration: Performance(掉壓問題)
CPU Spread Spectrum: Disabled
PCIE Spread Spectrum: Disabled
Configure advanced CPU Settings
_________________________________________________________
CPU Ratio Setting: 10.0
C1E Support: Disabled
CPU TM Function: Disabled
Vanderpool Technology: Disabled
Execute Didable Bit: Disabled
Max CPUID Value Limit: Disabled