小弟的配備
CPU: i7 930
MB: GA-X58A-UD5
RAM: Corsair CMT6GX3M3A1600C7
Power: SeaSonic X-SERIES 750W
散熱: Thermalrigt Venomous X RT
BIOS設定
CPU Clock Ratio 20 X
Inter® Turbo Boost Tech. ---Disable
CPU Cores Enable ---All
CPU Multi-Threading ---Enabled
CPU Enhancedd Halt (C1E) ---Disabled
C3/C6/C7 State Support ---Disabled
CPU Thermal Monitor ---Disabled
CPU EIST Function ---Disabled
Bi-Directional PROCHOT ---Enabled
Virtualization Technology --- Enabled
QPI Clock(BCLK) Control ---x36
QPI Clock Ratio --- 18
Uncore Clock Ratio ---x18
BCLK Frequency(Mhz) ---200
PCI Express Frequency(MHz) ---100
Performance Enhance ---- Turbo
Extreme Memory Profile ----Profile1
System Memory Multiplier(SPD) ----8
DRAM Timing Select(SPD) ---Expert
RAM 相關設定RAM標籤上的參數設定!
Load-Line Calibration -----Level 2
CPU Vcore -----1.28152V
QPI/Vtt Voltage -----1.340V
IOH Core Auto -----1.1V
DRAM Voltage 1.6 ----1.65V
小弟參考過另一篇http://forum.coolaler.com/showthread.php?t=234827&highlight=UD3R中的相關設定!!可是還是無法穩定上4G
HyperPI 95 跑完8匹馬會出現藍天白雲
prime95---跑不完
可以請哪位高手指點一下嗎?我只要求穩定上4G應該不成問題才是!!
先謝謝囉!!