- 已加入
- 9/18/03
- 訊息
- 14,396
- 互動分數
- 2
- 點數
- 0
璇辣:
1.CPU�摰3000mhz
2.BH-5閬�273x11, 2-2-2-5
3. TCCD閬�300x10, 2.5-3-3-x
4.�芷頝ame 3�igh details
隞乩��舐撠票�汴tremesystem��?#33;
Macci�:
************************************************************
As the advice from Macci,(run 3d mark 2001se, game 3 high details only);please see here
Mobo: MSI k8n neo2 Bios: 1.3b6
RAM: 1.Mushkin PC 3500 Level II BH-5, 2x 256mb DC kit
2.GSkill TCCD DDR550 2.5-3-3-7, 2x256mb DC kit
OS: Windows 2000 SP4
CPU AMD s939 3500+ 90nm
Power: OCZ power stream 520W
HD: Maxtor 6E040L0 IDE
Let's see those two set of RAM:
1. BH-5 273x11 2-2-2-5:
2.TCCD 300x10; 2.5-3-3-6:
It shows that results are really close to each other.
Therefore, I think there is no need to do BH-5 at 12x250, 2-2-2-5 right? :D
Thank you everyone.
**�啁��銝撘湄DR600頝?d05�?:PPP:
1.CPU�摰3000mhz
2.BH-5閬�273x11, 2-2-2-5
3. TCCD閬�300x10, 2.5-3-3-x
4.�芷頝ame 3�igh details
隞乩��舐撠票�汴tremesystem��?#33;
Macci�:

************************************************************
As the advice from Macci,(run 3d mark 2001se, game 3 high details only);please see here
Mobo: MSI k8n neo2 Bios: 1.3b6
RAM: 1.Mushkin PC 3500 Level II BH-5, 2x 256mb DC kit
2.GSkill TCCD DDR550 2.5-3-3-7, 2x256mb DC kit
OS: Windows 2000 SP4
CPU AMD s939 3500+ 90nm
Power: OCZ power stream 520W
HD: Maxtor 6E040L0 IDE
Let's see those two set of RAM:

1. BH-5 273x11 2-2-2-5:

2.TCCD 300x10; 2.5-3-3-6:

It shows that results are really close to each other.
Therefore, I think there is no need to do BH-5 at 12x250, 2-2-2-5 right? :D
Thank you everyone.
**�啁��銝撘湄DR600頝?d05�?:PPP:
