- 已加入
- 2/5/04
- 訊息
- 11,632
- 互動分數
- 0
- 點數
- 36
1. Fix DRAM fail no Beep.
2. Do not show SATA Device string during POST2 screen.
3. Update NVMM 4.79.
Switch to Big-Real-Mode before calling NVMM.
Fix "identify" function to be bus/dev/func independent.
During LDT-5x operation occasional CRC errors occur. Fixed with new PROD settings.
Certain Maxtor 300 GB drives fail detection, or are slow to detect.
Results in slow POST. Fixed with new PROD settings.
Fixed CK804 detection routine. Removed dependency on hardcoded Bus/Dev/Func number
4. Update NVPXE 2.03.0469.
.Fix CPU speed dependency causing initialization failure on faster processors
.Increase DHCP timeout. This avoids PXE error message "PXE-E51..." when connected to a switch
with Spanning Tree Protocol enabled.
.Fixed connectivity problems between Marvell PHY and some switches (ie. Cisco FastHub).
5. Added "Sort_PCI_ROM" for release more shadow space.
6. Modify CPU-Voltage function
7. Update CBROM.EXE Ver.1.47
(轉載自 Diamond Club)
請按右鍵以FlashGet下載
2. Do not show SATA Device string during POST2 screen.
3. Update NVMM 4.79.
Switch to Big-Real-Mode before calling NVMM.
Fix "identify" function to be bus/dev/func independent.
During LDT-5x operation occasional CRC errors occur. Fixed with new PROD settings.
Certain Maxtor 300 GB drives fail detection, or are slow to detect.
Results in slow POST. Fixed with new PROD settings.
Fixed CK804 detection routine. Removed dependency on hardcoded Bus/Dev/Func number
4. Update NVPXE 2.03.0469.
.Fix CPU speed dependency causing initialization failure on faster processors
.Increase DHCP timeout. This avoids PXE error message "PXE-E51..." when connected to a switch
with Spanning Tree Protocol enabled.
.Fixed connectivity problems between Marvell PHY and some switches (ie. Cisco FastHub).
5. Added "Sort_PCI_ROM" for release more shadow space.
6. Modify CPU-Voltage function
7. Update CBROM.EXE Ver.1.47
(轉載自 Diamond Club)
請按右鍵以FlashGet下載