Extreme Tweaker
AI Overlocking: Manual
CPU Ratio Control: Manual
--- Ratio CMOS Setting: 8
FSB Strap to North Bridge: AUTO
FSB Frequency: 333
PCIE Frequency: 100
DRAM Frequency: DDR3-1333
DRAM Command Rate: 2T
DRAM Timing Control: Manual
---CAS# Latency: 8
---RAS# to CAS# Delay: 8
---RAS# Precharge: 8
---RAS# Active Time: 27
---RAS# to RAS# Delay (TRRD): 10
---Row Refresh Cycle Time (TRFC): 48
---Write Recovery Time (TWR): 10
---Write to Read Delay (TWTR): 10
---Read to Precharge Time (TRTP): 10
DRAM Static Read Control: AUTO
DRAM Dynamic Write Control: AUTO
CPU Spread Spectrum: Disabled
PCIE Spread Spectrum: Disabled
CPU Voltage: AUTO
CPU Voltage Reference: AUTO
Loadline Calibratiom: AUTO or Enabled
FSB Termination Voltage: AUTO
North Bridge Voltage: AUTO
North Bridge Reference: AUTO
DRAM Voltage: 1.8v
-DDR3 Channel A Ref Voltage: AUTO
-DDR3 Channel B Ref Voltage: AUTO
-DDR3 Controller Ref Voltage: AUTO
South Bridge Voltage: AUTO
PLL Voltage: AUTO
NB LED Selection: NB Volt
SB LED Selection: PLL Volt
Frequency LED: Turn off
Voltiminder LED: Turn off
CPU Ratio Control: Manual
-- Ratio CMOS Setting:
C1E Support: Disabled
Max CPUID Value Limit: Disabled
Vanderpool Technology: Disabled
CPU TM Function: Disabled
Execute Disable Bit: Disabled
PECI: Disabled
USB Configuration
USB Functions: Enabled
Legacy USB Support: Disabled (need to enable it to detect USB flash drives)