我的OCZ Ram 不能超頻.. 請幫幫忙~

[hong304]

I use MSI Neo2-FR Motherbroad
OCZ Titanium DDR2 800 EPP CL4

I try it in E7200@440x7.5=3.3Ghz
OCZ Titanium DDR2 800 只可以去到 DDR2 880 CL5-5-5-15 1.9v (ORTHOS passed)
我試設定為DDR2 890 CL5-5-5-15 2.1V ,能進入windows, but few minutes after - blue screen..

why so cheap? am i unlucky one?

I try it in CPU 266*9.5 ,default 2.53Ghz E7200
有另一個問題, i can o/c it ,如果我set auto CL的話, I can O/C ram to 1066Mhz but CL 6-6-6-18 2.1V
但當我set手動mode... 1066Mhz CL6-6-6-18...就連啟動電腦都不能.. all are same cl6-6-6-18,but why can't boot it when i manual set
is it the setting problem , i don't know how to set these ( shown in image)

 

[foxwolf0510]

這一區是不能發問的，寫個信跟版主說幫你轉一下版，不然會被停權

 

[hong304]

版主可否幫我移去超頻發問區嗎? thx...