[OPB cbb-octeam2008] 3dmark vantage修正檔

[狂少]

Finally a good news about 3DMark Vantage.:D

Here's the 3DMark® Vantage Hotfix (Build 1.0.1) download.:)

http://www.futuremark.com/download/3dmva_hotfix_101/


Changelog :

The hotfix updates the following:
Off-line score viewing is now available in the Advanced Edition.
Score save / submit saved options are now available in the Advanced Edition.
Ad banners have been removed from all editions.
Added a "SEND ERROR" button to error messages; clicking this will send detailed error information to Futuremark for better bug tracking and fixing. No personally identifiable information will be sent or stored.

The hotfix fixes the following:
An issue preventing valid serial key entry in some cases has been fixed.
An issue causing "boost::filesystem::create_directory" error message after registration has been fixed.
Added a check and error message for hardware that is not DX10 capable.
Improved detection of supported resolutions so that CPU test minimum requirement (1280x1024) is now taken into account correctly.
Fixed an issue where pressing the ESC key during CPU test loading screen, the user would be taken to a score view with score -1.
The entire 3DMark Vantage application is now elevated to Administrator rights, rather than only the SystemInfo component. This will ensure more robust SystemInfo and benchmark functionality, and fixes the "pop-behind" elevation dialog.
Fixed an issue that sometimes caused "WM_QUIT" error messages.
Post-processing scale is now displayed correctly in the UI for the Extreme Preset.
Fixed an issue that could cause resolution switches at test runtime.

 

[coolaler]

感謝提供;face0;

 

[tsopin]

感謝分享這個資訊. 馬上來去裝裝看. 我到現在為止還是不能跑, 停在 generating shader那幕, 動也不動.........

再不能跑, 乾脆放棄啦;smash;

 

[hyde211]

* 解決某些情況下輸入正確的key也不能通過驗證的問題。
* 在輸入key之後出現的"boost::filesystem::create_directory"錯誤被修正。
* 加入驗證硬件DX10支持的檢測機制。
* 改進了檢測分辨率的機制，使得CPU測試時可以正確使用1280x1024。
* 在讀取CPU測試時如果按下ESC鍵將會出現評分為-1的畫面被修正。
* 把3DMark Vantage提升至Administrator權限，使得程序主頁面不會被其他Administrator權限的窗口阻擋。
* 修正了導致"WM_QUIT"的bug。
* 在Extreme Preset下，後處理選項能夠正確顯示。
* 修正了測試流程裡導致分辨率改變的問題。

注意：安裝補丁並不會影響測試的分數。V1.01和V1.00的3DMark Vantage分數是通用的。

 

[hugo0221]

感謝分享這個資訊. 馬上來去裝裝看. 我到現在為止還是不能跑, 停在 generating shader那幕, 動也不動.........

再不能跑, 乾脆放棄啦;smash;

咦，我以為只有我的系統有問題不能跑呢
原來還有苦主啊= =

感謝分享.. 下載中