Asus X38 系列bios之設置大全

[狂少]

主機板的BIOS設定不外乎就是歸類在3大項
1.CPU頻率調整
2.ram的參數校調
3.各項電壓的設定

以狂少個人來說, Asus所設計的BIOS模式我較為習慣
一但你摸清楚你的CPU, memory個性,換板子就不會又要從頭開始

狂少在此就分享Asus所有X38系列各項BIOS超頻設定細節
大家有問題請題出:

Asus X38 Series BIOS Settings from OPB

CPU Feature:

Ai Overclock Tuner [Manual]
OC From CPU Level Up [Auto]
CPU Ratio Control [Manual]
Ratio CMOS Setting: [8]
FSB Frequency [450]
FSB Strap to North Bridge [Auto]
PCIE Frequency [110 for 3D; 100 for normal]

DRAM Settings: DDR2(MF) DDR3(ME & P5E3)

DRAM Frequency [對應frequency及strap]
DRAM Command Rate [Auto]
DRAM Timing Control [Manual]
CAS# Latency [5]
RAS# to CAS Delay [5]
RAS# Precharge [5]
RAS# Active Time [12]
RAS# To Ras# Delay [3]
Row Refresh Cycle Time [42]
Write Recovery Time [6]
Read To Precharge Time [3]
Read To Write Delay(S/D) [8]
Write To Read Delay(S) [3]
Write To Read Delay(D) [5]
Read To Read Delay(S) [4]
Read To Read Delay(D) [6]
Write To Write Delay(S) [4]
Write To Write Delay(D) [6]
DRAM Static Read Control [Disabled]
Ai Clock Twister [Strong]
Transaction Booster [Enabled]
Boost Level [0]

Voltage Settings:

CPU Voltage [1.3v~1.4v]
CPU PLL Voltage [Auto]
North Bridge Voltage [1.61v~1.7v]
DRAM Voltage [2.16v~2.35v]
FSB Termination Voltage [1.5v]
South Bridge Voltage [Auto]
Loadline Calibration [Enabled]
CPU GTL Reference [0.63x]
North Bridge GTL Reference [0.67x]
DDR2 Channel A REF Voltage [Auto]
DDR2 Channel B REF Voltage [Auto]
DDR2 Controller REF Voltage [DDR2_REF]
SB 1.5V Voltage [Auto]

 

[s837047]

狂爺有收到小弟的PM嗎

 

[狂少]

有
但還沒時間拍照...就是之前我有拍過圓形的

 

[s837047]

有
但還沒時間拍照...就是之前我有拍過圓形的

請狂爺抽空替小弟處理一下 ;shakehand

 

[cuifhe]

謝謝狂大，按照您的方案設置后，困惑已久的掉電壓問題終于解決了，現在是BIOS里設1.4V進系統顯示1.392V，4個CPU核心全速工作也不掉壓了，非常感謝！

 

[sco005taiwan]

狂爺心經大法!趕快reboot試啦!

 

[marlowe]

收下一份，感謝狂兄教學^^:PPP:

 

[Second2]

好詳盡的說明喔~可惜沒有P35的設定...這也難怪啦,X38還是目前極現超頻者的最愛...

 

[狂少]

好詳盡的說明喔~可惜沒有P35的設定...這也難怪啦,X38還是目前極現超頻者的最愛...

這要是懂, p35是手到擒來..
p35我有做阿..你偷懶;smash;

 

[tuan]

我也收下一份，感謝狂兄教學^^

毎次看、都有新收穫　　.......。