Originally posted by phager@Mar 7 2005, 08:33 PM
可以貼一下.
裝置管理員中.
SATA控制器的狀態嗎?
可以...沒問題!馬上貼
只看到2顆IDE的碟....另外兩個SATA碟不見了!這是更新W7100NMS.111後的BIOS的結果....大大說設定BIOS嗎?小弟英文不才...還是夠笨的關係....似乎設定完了還是沒看懂
搞了半天.....還是沒在視窗下抓到我的HD...但是如果我安插在nFORCE的SATA無事.....變成可以抽取的HD....
大大說的是底下這個設定嗎?
1 Enter BIOS setup→ Integrated Peripherals→On board Device→set SATA to RAID→ save & exit CMOS
2.You will see the SATA HD which you connect to the MB shows during boot up.
Then press Ctrl+S or F4 to enter the BIOS RAID utility.
( you can refer to the attachement P1~P12)
3.Set the SATA HDD as JBOD→press Ctrl+E to restart the system
4.Enter BIOS setup→Integrated Peripherals→On board Device→set RAID to SATA→ save & exit CMOS
5.And then Please refer to the attachement P13 to install the RAID driver.