查看 RSS Feed

滄海桑田 - 軟中帶硬

【打破窗戶】Windows 7 Loader 2.1 (by Daz)

評分: 46 票,平均 4.83 分。


【軟體名稱】:Windows 7 Loader 2.1 (by Daz)
【軟體語言】:英文
【軟體分類】:打破窗戶
【檔案大小】:1.5 MB
【檔案類型】:RAR、Zip壓縮檔
【解壓密碼】:***回覆後可見***
【官方網頁】:http://forums.mydigitallife.info/threads/24901-Current-release-information

About

This is the loader application that's used by millions of people worldwide, well known for passing Microsoft's WAT (Windows Activation Technologies) and is arguably the safest Windows activation exploit ever created. The application itself injects a SLIC (System Licensed Internal Code) into your system before Windows boots; this is what fools Windows into thinking it's genuine.



The things you might want to know

• It works on 32-bit and 64-bit systems
• It's compatible with Windows 7 SP1 and all system updates
• It's compatible with all system languages
• It can be used to pre-activate Windows
• It allows you to install custom OEM information
• It features application integrity checking
• It supports hidden partitions and some complex setups
• It can work alongside Linux's GRUB or any other boot manager
• It works with VMware, VirtualBox and Hyper-V
• It works with most hard drive encryption software e.g. TrueCrypt or BitLocker
• It allows you to add your own certificates and serials externally
• It will install just the certificate and serial for users with an existing SLIC 2.1
• It features automated system profiling (The application matches everything up for you)
• It won't modify any system files
• It runs before Windows is launched
• No extra processes are run so you have nothing eating at your RAM
• All key parts of the loader are encrypted with a custom encryption
• Every user has a unique version of the loader installed on his or her system



Supported operating systems

• Windows 7 Ultimate
• Windows 7 Ultimate E
• Windows 7 Professional
• Windows 7 Professional E
• Windows 7 Home Premium
• Windows 7 Home Premium E
• Windows 7 Home Basic
• Windows 7 Starter
• Windows 7 Starter E
• Windows Vista Ultimate
• Windows Vista Business
• Windows Vista Business N
• Windows Vista Home Premium
• Windows Vista Home Basic
• Windows Vista Home Basic N
• Windows Vista Starter
• Windows Server 2008 Enterprise
• Windows Server 2008 Foundation
• Windows Server 2008 Standard
• Windows Small Business Server 2008
• Windows Storage Server 2008 Standard
• Windows Server 2008 R2 Enterprise
• Windows Server 2008 R2 Foundation
• Windows Server 2008 R2 Standard
• Windows Small Business Server 2011 Standard

Note: You must be running build 7600 or greater for Windows 7 and Windows Server 2008 R2.
Note: I don't recommend using any of the Windows 7 E editions.
Note: Windows 7 N editions will only be supported when OEM SLP serials leak.




Application integrity checking?

Hover your mouse over the green, amber or red icon to see detailed application information.

Note: Even if the icon is green someone might have found a way around the protection system so it's worth checking that the applications path is always the same as the location from which you launched the application. You should also check that the MD5 matches the MD5 found online.



Virus scanner results

All virus scanner detection's are a false-positive. Simply turn off your anti-virus while installing the loader.



Version 2.1 (11/28/2011)
* Added a new GRLDR version
* Added CRC32 checksums to SLIC and certificate dumps
* Enhanced serial decoding so that it supports Windows 8
* Added EXO, ONKYO and Quanmax Home Premium serials
* Added EXO and ONKYO SLIC's and certificates
* Removed NEC Ultimate serial as it's not NEC
* Other minor tweaks and fixes


MD5: b2ed18909c4e6153b5b92afa25858431
SHA-1: 10fa9ab80c6495781c851913db2b67b255c8c059


Note: The hashes are for the executable file and not the zip file.



Do I need to update?
If you have installed a version and you're activated then you shouldn't need to update. If however you are like me and you like to use the latest and the best versions of software then updating shouldn't be a problem.


Using a BIE release or another activation solution?
•Launch the loader application and select to uninstall — This is important
•Restart the PC
•Install the loader and restart the PC
•Visit the following website to revalidate Windows: www.microsoft.com/genuine/ (You might need to use IE8)

How can I convert from RemoveWAT to this loader?
•Uninstall RemoveWAT
•Download and run this (Cleans up things RemoveWAT doesn't restore. Restart the PC if asked)
•Install the loader
•Visit the following website to revalidate Windows: www.microsoft.com/genuine/ (You might need to use IE8)



Note:
If Windows does NOT activate:
Re-run the loader under Windows and choose a different loader mode from the drop-down list.



遇到無限重開機者
用WIN7安裝光碟開機
選擇修復選項進入
選擇命令提示字元模式
輸入"bootsect.exe /nt60 SYS /force" (不含")
重開機
使用其他Loader版本如 version 2.0.9version 2.0.0

------------------------------------------------------------------------------------------------------

使用1.7.6和1.7.7兩個版本均會導致電腦開機不斷重啟無法正常進入WIN7
1.7.8用於英文語系外的系統會出問題
1.7.9陷入重開機機率高
建議使用1.9.5以後版本
除非需要,不必更新版本



破窗步驟:
請先準備榔頭鐵槌、球棒鋁棒、石塊磚頭或者赤手空拳...如果您被加裝防彈玻璃...可能還需要斯巴達雷射...


喔不...請先將光碟機內淨空、網路連線切掉
將 Windows 7 Loader 解壓縮到任一資料夾(解壓出錯請重新下載或更新 WinRAR 版本),按右鍵,選擇「以系統管理員身份執行」開啟 Loader。
先確認你安裝的系統版本 Build 為 76XX 開頭


直接按下「Install 鍵」進行安裝



或者切換到「Profile」,選擇你喜歡的廠牌(3項盡量一樣,SLIC和Certificate一定要一樣),選好後按「Install 鍵」。



按「OK」繼續,程序會在背景執行,完成前都不要重新開機不要動鍵盤滑鼠,在進行過程中不要做任何操作。



等待約數秒後如彈出如圖訊息代表已成功安裝,按「OK」自動重新開機。




善後工作:
最後進入「控制台」>「系統」檢查「產品識別碼」看看是否已經改變,如圖所示的產品識別碼顯示為「OEM」及產品識別碼最後那組不再為 「00497」,則已經成功轉換。



開啟「命令提示字元」視窗,輸入「slmgr.vbs -dlv」,檢察授權狀態。


如果你另外有OEM序號想用的話可以自行輸入,選擇你要用的OEM序號廠牌,之後步驟跟上面一樣。



非新安裝系統者
之前有使用過其他任何破窗方法或行動者
嘗試過破窗行動被抓包者
使用免啟動系統者

請先按「Uninstall」進行反安裝後
重開機
再按「Install」進行安裝

使用「任何方法」破窗失敗者
記得都先按「Uninstall」進行反安裝後
重開機
再按「Install」進行安裝

有問題請仔細看完本文再說...
不想有問題的就別裝整合版或自動啟動版之類的
乖乖找原版(MSDN或RETAIL)裝!



Q&A:

Q. I received the error message "Error finding your systems active partition", what do I have to do?
A. You need to format the whole hard drive with a program like Active@ Kill Disk. This issue is caused by your locked OEM partition. http://software.lsoft.net/boot-cd-iso.zip

Q. I received the error message "Failed to add loader to the boot code", what do I have to do?
A. Disable any system protection. Some types of software block the loader application from installing to the boot code.

Q. I've used a version of the loader before and it failed to work, what do I have to do?
A. If you previously used bootsect to get back into Windows then you first need to press uninstall, reboot and then install the newest version of the loader.

Q. Why was table sorting changed so that it's now disabled by default?
A. Some machines don't like the table order being changed so to make the loader more system compatible we disabled it by default.

Q. I've previously used another activation solution and I think it's modified my systems files, can I fix it?
A. You can first try to uninstall what you originally installed and then try running "sfc.exe /scannow" from command prompt as an administrator.

Q. I've got Linux on another partition/drive, is there anything I should know?
A. Use the preserve current boot code option.

Q. How can I use BitLocker, TrueCrypt or another boot manager?
A. First setup the software and then install the loader with the option selected to preserve the current boot code.

Q. I lose activation status after my systems been to sleep or has been in hibernation, can I fix it?
A. Go to the advanced options and select to disable type 4 memory, install the loader again and see if that cures it. If you're not cured try to disable type 3 memory instead. If it still fails try selecting the legacy setting.

Q. I installed the loader and my system hangs during the boot process, can I fix it?
A. Go to the advanced options and select to disable type 4 memory, install the loader again and see if that cures it. If you're not cured try to disable type 3 memory instead. If it still fails try selecting the legacy setting.

Q. I installed the loader and rebooted but I'm not activated. The loader application displays the message "BAD SLIC SIZE" or "BAD SLIC DATA", can I fix it?
A. Uninstall the loader, power down and then boot up the system again. Go to the applications advanced options and select to ignore the existing SLIC and then press install.



確認「【打破窗戶】Windows 7 Loader 2.1 (by Daz)」到 Digg 確認「【打破窗戶】Windows 7 Loader 2.1 (by Daz)」到 del.icio.us 確認「【打破窗戶】Windows 7 Loader 2.1 (by Daz)」到 StumbleUpon 確認「【打破窗戶】Windows 7 Loader 2.1 (by Daz)」到 Google

[ARG:5 UNDEFINED]更新於 2011-11-29 23:30

分類
軟體應用

評論

  1. hlyfl 的頭像
    Good! Thanks! but no link !
    [ARG:5 UNDEFINED]更新於 2009-10-08 15:57
  2. chyi1678 的頭像
    我來試試看..感激囉
  3. PolliwogAndy 的頭像
    感謝
    正裝完非常需要= =
  4. chengt9417 的頭像
    感謝分享最新的版本~來試用囉。
  5. hjklhjk.lhjka 的頭像
    感謝分享最新的版本0.0+
    thX~
  6. Basuya 的頭像
    回覆才可見密碼?
  7. qwe456456 的頭像
    好東西當然要推一下!!
  8. jjyfans 的頭像
    謝謝, 試試看能不能用
  9. chiaming1006 的頭像
    it's really good one, tks a lot
  10. wellss 的頭像
    thanks y much
  11. krishna 的頭像
    希望真的可以破解...謝謝您
  12. whymeha 的頭像
    非常多謝大大的分享!
  13. aabbccdd1234 的頭像
    感謝大大無私的分享~馬上來試用一下
  14. assassin1 的頭像
    謝謝分享
  15. longer0931 的頭像
    真是千辛萬苦
    感謝!!
  16. alexsasa 的頭像
    感謝大大的分享~~
  17. a13546651 的頭像
    不錯不錯不錯不錯
  18. matsuzaki 的頭像
    感謝大大無私的分享!
  19. cweiping 的頭像
    目前只能靠1.7.5來試試..感謝提供
  20. hungerchan 的頭像
    目前只能靠1.7.5來試試..感謝提供